本文实例为大家分享CentOS 7.2 Yum安装mysql5.6的方法，供大家参考，具体内容如下
配置CentOS SCLo源
?
[3] 添加 CentOS SCLo Software collections Repository.[root@linuxprobe~]# yum -y install centos-release-scl-rh centos-release-scl# set [priority=10][root@linuxprobe~]# sed -i -e "s/\]$/\]\npriority=10/g" /etc/yum.repos.d/CentOS-SCLo-scl.repo[root@linuxprobe~]# sed -i -e "s/\]$/\]\npriority=10/g" /etc/yum.repos.d/CentOS-SCLo-scl-rh.repo# for another way, change to [enabled=0] and use it only when needed[root@linuxprobe~]# sed -i -e "s/enabled=1/enabled=0/g" /etc/yum.repos.d/CentOS-SCLo-scl.repo[root@dlp ~]# sed -i -e "s/enabled=1/enabled=0/g" /etc/yum.repos.d/CentOS-SCLo-scl-rh.repo |
yum安装MySQL
?
# 安装mysql[root@linuxprobe~]# yum --enablerepo=centos-sclo-rh -y install rh-mysql56-mysql-server# 加载环境变量[root@linuxprobe ~]# scl enable rh-mysql56 bash[root@linuxprobe ~]# mysql -V mysql Ver 14.14 Distrib 5.6.26, for Linux (x86_64) using EditLine wrapper[root@linuxprobe ~]# which mysql /opt/rh/rh-mysql56/root/usr/bin/mysql# 设置mysql开机自启动root@linuxprobe ~]# vi /etc/profile.d/rh-mysql56.sh#!/bin/bashsource /opt/rh/rh-mysql56/enableexport X_SCLS="`scl enable rh-mysql56 'echo $X_SCLS'`" |
?
[4] Enable MySQL 5.6 and Configure initial settings.[root@linuxprobe ~]# vi /etc/opt/rh/rh-mysql56/my.cnf.d/mysql-server.cnf# add follows within [mysqld] section[mysqld]character-set-server=utf8[root@linuxprobe ~]# systemctl start rh-mysql56-mysqld[root@linuxprobe ~]# systemctl enable rh-mysql56-mysqld[root@linuxprobe ~]# mysql_secure_installationNOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MySQL SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!In order to log into MySQL to secure it, we'll need the currentpassword for the root user. If you've just installed MySQL, andyou haven't set the root password yet, the password will be blank,so you should just press enter here.Enter current password for root (enter for none):OK, successfully used password, moving on...Setting the root password ensures that nobody can log into the MySQLroot user without the proper authorisation.# set root passwordSet root password? [Y/n] yNew password:Re-enter new password:Password updated successfully!Reloading privilege tables.. ... Success!By default, a MySQL installation has an anonymous user, allowing anyoneto log into MySQL without having to have a user account created forthem. This is intended only for testing, and to make the installationgo a bit smoother. You should remove them before moving into aproduction environment.# remove anonymous usersRemove anonymous users? [Y/n] y ... Success!Normally, root should only be allowed to connect from 'localhost'. Thisensures that someone cannot guess at the root password from the network.# disallow root login remotelyDisallow root login remotely? [Y/n] y ... Success!By default, MySQL comes with a database named 'test' that anyone canaccess. This is also intended only for testing, and should be removedbefore moving into a production environment.# remove test databaseRemove test database and access to it? [Y/n] - Dropping test database... ... Success! - Removing privileges on test database... ... Success! Reloading the privilege tables will ensure that all changes made so farwill take effect immediately.# reload privilege tablesReload privilege tables now? [Y/n] y ... Success!Cleaning up...All done! If you've completed all of the above steps, your MySQLinstallation should now be secure.Thanks for using MySQL! |
?
[root@linuxprobe ~]# mysql -u root -pEnter password: Welcome to the MySQL monitor. Commands end with ; or \g.Your MySQL connection id is 13Server version: 5.6.26 MySQL Community Server (GPL) Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or itsaffiliates. Other names may be trademarks of their respectiveowners.Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.mysql> select user,host,password from mysql.user; +------+-----------+-------------------------------------------+| user | host | password |+------+-----------+-------------------------------------------+| root | localhost | *E2ACEC2F2DA384EE6753673365DFEF35F0C272C9 || root | 127.0.0.1 | *E2ACEC2F2DA384EE6753673365DFEF35F0C272C9 || root | ::1 | *E2ACEC2F2DA384EE6753673365DFEF35F0C272C9 |+------+-----------+-------------------------------------------+3 rows in set (0.00 sec)mysql> show databases; +--------------------+| Database |+--------------------+| information_schema || mysql || performance_schema |+--------------------+3 rows in set (0.00 sec)mysql> exitBye |
开启防火墙
?
| 1234 | [root@linuxprobe ~]# firewall-cmd –add-service=MySQL –permanent success [root@linuxprobe ~]# firewall-cmd –reload success |
同样使用yum在vdevops.org上面安装mysql，安装步骤参考上面
MySQL 主从
Master端：linuxprobe
?
[root@linuxprobe~]# vi /etc/opt/rh/rh-mysql56/my.cnf.d/mysql-server.cnf[mysqld]# add follows in [mysqld] section : get binary logslog-bin=mysql-bin# define uniq server IDserver-id=101[root@linuxprobe ~]# mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g.Your MySQL connection id is 2Server version: 5.6.26-log MySQL Community Server (GPL)Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved.Oracle is a registered trademark of Oracle Corporation and/or itsaffiliates. Other names may be trademarks of their respectiveowners.Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.mysql> grant replication slave on *.* to replica@'%' identified by 'password';Query OK, 0 rows affected (0.07 sec)mysql> flush privileges; Query OK, 0 rows affected (0.00 sec)mysql> exitBye |
开启防火墙
?
| 1234 | [root@linuxprobe ~]# firewall-cmd –add-service=mysql –permanent success [root@linuxprobe ~]# firewall-cmd –reload success |
Slave端：vdevops
?
[root@vdevops~]# vi /etc/opt/rh/rh-mysql56/my.cnf.d/mysql-server.cnf[mysqld]# add follows in [mysqld] section : get binary logslog-bin=mysql-bin# define server ID (different one from Master Host)server-id=102# read onlyread_only=1# define own hostnamereport-host=node01.srv.world[root@vdevops~]# systemctl restart rh-mysql56-mysqld |
Master端：备份数据库
?
[root@linuxprobe ~]# mysql -u root -pEnter password: Welcome to the MySQL monitor. Commands end with ; or \g.Your MySQL connection id is 3Server version: 5.6.26-log MySQL Community Server (GPL)Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved.Oracle is a registered trademark of Oracle Corporation and/or itsaffiliates. Other names may be trademarks of their respectiveowners.Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.mysql> flush tables with read lock; # 锁表Query OK, 0 rows affected (0.01 sec)mysql> show master status; #记住file的数值和position的值+------------------+----------+--------------+------------------+-------------------+| File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |+------------------+----------+--------------+------------------+-------------------+| mysql-bin.000001 | 400 | | | |+------------------+----------+--------------+------------------+-------------------+1 row in set (0.00 sec)mysql> exitBye#[root@linuxprobe ~]# mysqldump -u root -p --all-databases --lock-all-tables --events > mysql_dump.sql # 备份数据库Enter password: [root@linuxprobe ~]# mysql -u root -pEnter password: Welcome to the MySQL monitor. Commands end with ; or \g.Your MySQL connection id is 5Server version: 5.6.26-log MySQL Community Server (GPL) Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or itsaffiliates. Other names may be trademarks of their respectiveowners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> unlock tables; # 解锁Query OK, 0 rows affected (0.00 sec) mysql> exitBye[root@linuxprobe ~]# scp mysql_dump.sql vdevops.org@/tmp/cp: cannot create regular file ‘vdevops.org@/tmp/': No such file or directory[root@linuxprobe ~]# scp mysql_dump.sql vdevops.org:/tmp/The authenticity of host 'vdevops.org (10.1.1.56)' can't be established.ECDSA key fingerprint is f8:d2:55:54:8f:e8:43:e0:ee:aa:d6:8d:53:8c:8e:85.Are you sure you want to continue connecting (yes/no)? yesWarning: Permanently added 'vdevops.org' (ECDSA) to the list of known hosts.mysql_dump.sql |
Slave 端：
?
[root@vdevops ~]# mysql -u root -p < /tmp/mysql_dump.sqlEnter password: [root@vdevops ~]# mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g.Your MySQL connection id is 3Server version: 5.6.26-log MySQL Community Server (GPL) Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or itsaffiliates. Other names may be trademarks of their respectiveowners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> change master to -> master_host='10.1.1.53', # master ip -> master_user='replica', # replication ID -> master_password='password', # replication passwd -> master_log_file='mysql-bin.000001', # bin-log number -> master_log_pos=400; # positionQuery OK, 0 rows affected, 2 warnings (0.03 sec) mysql> start slave;Query OK, 0 rows affected (0.01 sec) mysql> show slave status\G*************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 10.1.1.53 Master_User: replica Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.000001 Read_Master_Log_Pos: 475 Relay_Log_File: mysqld-relay-bin.000002 Relay_Log_Pos: 358 Relay_Master_Log_File: mysql-bin.000001 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 475 Relay_Log_Space: 532 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 0Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 101 Master_UUID: d47dddc3-9c70-11e6-8efb-000c29ffc05a Master_Info_File: /var/opt/rh/rh-mysql56/lib/mysql/master.info SQL_Delay: 0 SQL_Remaining_Delay: NULL Slave_SQL_Running_State: Slave has read all relay log; waiting for the slave I/O thread to update it Master_Retry_Count: 86400 Master_Bind: Last_IO_Error_Timestamp: Last_SQL_Error_Timestamp: Master_SSL_Crl: Master_SSL_Crlpath: Retrieved_Gtid_Set: Executed_Gtid_Set: Auto_Position: 01 row in set (0.00 sec) |
精彩专题分享：mysql不同版本安装教程 mysql5.7各版本安装教程 mysql5.6各版本安装教程
以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持脚本之家。
点击查看更多内容
为 TA 点赞
评论
共同学习，写下你的评论
评论加载中...
作者其他优质文章
正在加载中
相关文章推荐
感谢您的支持，我会继续努力的～
扫码打赏，你说多少就多少
赞赏金额会直接到老师账户
支付方式
打开微信扫一扫，即可进行扫码打赏哦