1.前言
队列是我们在使用GCD中经常接触的技术点。
2.关键点
2.1 主队列和主线程
这两个术语我们可以经常听到，不知道有没有人会把这两个概念等同化。主队列和主线程是有关联，但是它们是两个不同的概念。简单地说，主队列是主线程上的一个串行队列，是系统自动为我们创建的。换言之，主线程是可以执行除主队列之外其他队列的任务。
2.2 队列和线程
Concurrent Programming: APIs and Challenges中的一张图片可以很直观地描述GCD与线程之间的关系：
GCDandThread@2x.png
一个线程内可能有多个队列，这些队列可能是串行的或者是并行的，按照同步或者异步的方式工作。
3.队列的定义
dispatch_queue_s是队列的结构体，可以说我们在GCD中接触最多的结构体了。
struct dispatch_queue_vtable_s {
DISPATCH_VTABLE_HEADER(dispatch_queue_s);
};#define DISPATCH_QUEUE_MIN_LABEL_SIZE 64#ifdef __LP64__#define DISPATCH_QUEUE_CACHELINE_PAD 32#else#define DISPATCH_QUEUE_CACHELINE_PAD 8#endif#define DISPATCH_QUEUE_HEADER \
uint32_t volatile dq_running; \
uint32_t dq_width; \
struct dispatch_object_s *volatile dq_items_tail; \ struct dispatch_object_s *volatile dq_items_head; \
unsigned long dq_serialnum; \ dispatch_queue_t dq_specific_q;struct dispatch_queue_s {
DISPATCH_STRUCT_HEADER(dispatch_queue_s, dispatch_queue_vtable_s);
DISPATCH_QUEUE_HEADER; char dq_label[DISPATCH_QUEUE_MIN_LABEL_SIZE]; // must be last
char _dq_pad[DISPATCH_QUEUE_CACHELINE_PAD]; // for static queues only};GCD中使用了很多的宏，不利于我们理解代码，我们用对应的结构替换掉定义的宏，如下：
struct dispatch_queue_s {
//第一部分：DISPATCH_STRUCT_HEADER(dispatch_queue_s, dispatch_queue_vtable_s)
const struct dispatch_queue_vtable_s *do_vtable; \ //dispatch_queue_s的操作函数:dispatch_queue_vtable_s类型的结构体
struct dispatch_queue_s *volatile do_next; \ //链表的next
unsigned int do_ref_cnt; \ //引用计数
unsigned int do_xref_cnt; \ //外部引用计数
unsigned int do_suspend_cnt; \ //暂停标志，比如延时处理中，在任务到时后，计时器处理将会将该标志位修改，然后唤醒队列调度
struct dispatch_queue_s *do_targetq; \ //目标队列，GCD允许我们将一个队列放在另一个队列里执行任务
void *do_ctxt; \ //上下文，用来存储线程池相关数据，比如用于线程挂起和唤醒的信号量、线程池尺寸等
void *do_finalizer;
//第二部分：DISPATCH_QUEUE_HEADER
uint32_t volatile dq_running; \ //是否运行中
uint32_t dq_width; \ //最大并发数：主线程/串行中这个值为1
struct dispatch_object_s *volatile dq_items_tail; \ //链表尾节点
struct dispatch_object_s *volatile dq_items_head; \ //链表头节点
unsigned long dq_serialnum; \ //队列的序列号
dispatch_queue_t dq_specific_q; //specific队列
//其他：
char dq_label[DISPATCH_QUEUE_MIN_LABEL_SIZE]; // must be last 说明队列的名字要少于64个字符
char _dq_pad[DISPATCH_QUEUE_CACHELINE_PAD]; // for static queues only};4.队列的类型
队列的类型可以分为主队列、管理队列、自定义队列、全局队列4种类型。
4.1 主队列
我们在开发过程中可以使用dispatch_get_main_queue获取主队列，看一下它的定义：
#define dispatch_get_main_queue() (&_dispatch_main_q)struct dispatch_queue_s _dispatch_main_q = {#if !DISPATCH_USE_RESOLVERS
.do_vtable = &_dispatch_queue_vtable,
.do_targetq = &_dispatch_root_queues[
DISPATCH_ROOT_QUEUE_IDX_DEFAULT_OVERCOMMIT_PRIORITY],
#endif
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.dq_label = "com.apple.main-thread",
.dq_running = 1,
.dq_width = 1, //说明主队列是一个串行队列
.dq_serialnum = 1,
};接着我们看一下它的几个主要属性：
1.do_vtable
const struct dispatch_queue_vtable_s _dispatch_queue_vtable = {
.do_type = DISPATCH_QUEUE_TYPE,
.do_kind = "queue",
.do_dispose = _dispatch_queue_dispose,
.do_invoke = NULL,
.do_probe = (void *)dummy_function_r0,
.do_debug = dispatch_queue_debug,
};2.do_targetq
主队列的目标队列："com.apple.root.default-overcommit-priority"这个全局队列。这里我们先提前总结一下：非全局队列的队列类型（主队列以及后面提到的管理队列和自定义队列），都需要压入到全局队列处理，所以需要设置do_targetq。
[DISPATCH_ROOT_QUEUE_IDX_DEFAULT_OVERCOMMIT_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_DEFAULT_OVERCOMMIT_PRIORITY],
.dq_label = "com.apple.root.default-overcommit-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 7,
},3.do_ref_cnt和do_xref_cnt
前面提到do_ref_cnt和do_xref_cnt是引用计数，主队列的这两个值为DISPATCH_OBJECT_GLOBAL_REFCNT。既然是引用计数，那想必是和GCD的内存管理有关，找到和内存管理相关的代码：
voiddispatch_retain(dispatch_object_t dou){ if (slowpath(dou._do->do_xref_cnt == DISPATCH_OBJECT_GLOBAL_REFCNT)) { return; // global object
}
...
}void_dispatch_retain(dispatch_object_t dou)
{ if (slowpath(dou._do->do_ref_cnt == DISPATCH_OBJECT_GLOBAL_REFCNT)) { return; // global object
}
...
}voiddispatch_release(dispatch_object_t dou){ if (slowpath(dou._do->do_xref_cnt == DISPATCH_OBJECT_GLOBAL_REFCNT)) { return;
}
...
}void_dispatch_release(dispatch_object_t dou)
{ if (slowpath(dou._do->do_ref_cnt == DISPATCH_OBJECT_GLOBAL_REFCNT)) { return; // global object
}
...
}从上面几个函数我们可以看出，主队列的生命周期是伴随着应用的，不会受retain和release的影响。
4.2 管理队列
_dispatch_mgr_q（管理队列），是GCD的内部队列，不对外公开。从名字上看，这个队列应该是用来扮演管理的角色，GCD定时器就用到了管理队列。
struct dispatch_queue_s _dispatch_mgr_q = {
.do_vtable = &_dispatch_queue_mgr_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_targetq = &_dispatch_root_queues[
DISPATCH_ROOT_QUEUE_IDX_HIGH_OVERCOMMIT_PRIORITY],
.dq_label = "com.apple.libdispatch-manager",
.dq_width = 1,
.dq_serialnum = 2,
};1.do_vtable
static const struct dispatch_queue_vtable_s _dispatch_queue_mgr_vtable = {
.do_type = DISPATCH_QUEUE_MGR_TYPE,
.do_kind = "mgr-queue",
.do_invoke = _dispatch_mgr_thread,
.do_debug = dispatch_queue_debug,
.do_probe = _dispatch_mgr_wakeup,
};2.do_targetq
管理队列的目标队列："com.apple.root.high-overcommit-priority"这个全局队列。
[DISPATCH_ROOT_QUEUE_IDX_HIGH_OVERCOMMIT_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_HIGH_OVERCOMMIT_PRIORITY],
.dq_label = "com.apple.root.high-overcommit-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 9,
},3.do_ref_cnt和do_xref_cnt
管理队列的这两个值为DISPATCH_OBJECT_GLOBAL_REFCNT，所以和主队列的生命周期应该是一样的。
4.3 自定义队列
我们在开发中会使用 dispatch_queue_create(const char *label, dispatch_queue_attr_t attire)创建一个自定义的队列。它的源代码如下：
dispatch_queue_tdispatch_queue_create(const char *label, dispatch_queue_attr_t attr)
{ dispatch_queue_t dq; size_t label_len; if (!label) {
label = "";
}
label_len = strlen(label); if (label_len < (DISPATCH_QUEUE_MIN_LABEL_SIZE - 1)) {
label_len = (DISPATCH_QUEUE_MIN_LABEL_SIZE - 1);
} // XXX switch to malloc()
dq = calloc(1ul, sizeof(struct dispatch_queue_s) -
DISPATCH_QUEUE_MIN_LABEL_SIZE - DISPATCH_QUEUE_CACHELINE_PAD +
label_len + 1); if (slowpath(!dq)) { return dq;
}//队列初始化数据
_dispatch_queue_init(dq); strcpy(dq->dq_label, label); if (fastpath(!attr)) { return dq;
} if (fastpath(attr == DISPATCH_QUEUE_CONCURRENT)) {
dq->dq_width = UINT32_MAX;
dq->do_targetq = _dispatch_get_root_queue(0, false);
} else {
dispatch_debug_assert(!attr, "Invalid attribute");
} return dq;
}1.slowpath(x)和fastpath(x)
关于这两个宏的定义如下：
#define fastpath(x) ((typeof(x))__builtin_expect((long)(x), ~0l))#define slowpath(x) ((typeof(x))__builtin_expect((long)(x), 0l))
fastpath(x)表示x的值一般不为0，希望编译器进行优化。slowpath(x)表示x的值很可能为0，希望编译器进行优化。
2._dispatch_queue_init
static inline void
_dispatch_queue_init(dispatch_queue_t dq)
{
dq->do_vtable = &_dispatch_queue_vtable;
dq->do_next = DISPATCH_OBJECT_LISTLESS;
dq->do_ref_cnt = 1;
dq->do_xref_cnt = 1; // Default target queue is overcommit!
dq->do_targetq = _dispatch_get_root_queue(0, true);
dq->dq_running = 0;
dq->dq_width = 1;
dq->dq_serialnum = dispatch_atomic_inc(&_dispatch_queue_serial_numbers) - 1;
}_dispatch_queue_init默认设置一个队列为串行队列，它的目标队列是_dispatch_get_root_queue(0, true)。
3.do_targetq
前面对这个字段的解释有点简单了，do_targetq代表目的队列。在Concurrent Programming: APIs and Challenges提到：
While custom queues are a powerful abstraction, all blocks you schedule on them will ultimately trickle down to one of the system’s global queues and its thread pool(s).
虽然自定义队列是一个强大的抽象，但你在队列上安排的所有Block最终都会渗透到系统的某一个全局队列及其线程池。
看起来自定义队列更像是全局队列的一个代理。在自定义队列创建的时候默认其目标队列为_dispatch_get_root_queue(0, true)。其中0代表优先级DISPATCH_QUEUE_PRIORITY_DEFAULT，true代表是否是overcommit。overcommit参数表示该队列在执行block时，无论系统多忙都会新开一个线程，这样做的目的是不会造成某个线程过载。如果是自定义并发队列的话，do_targetq会被设置为_dispatch_get_root_queue(0, false)。
值得注意的是，主队列的目标队列也是一个全局队列，全局队列的底层就是普通的线程池（这个会在全局队列中讲到）。
4.dq_serialnum
dq_serialnum是在_dispatch_queue_serial_numbers基础上进行原子操作加1，即从12开始累加。1到11被保留的序列号定义如下：
// skip zero// 1 - main_q// 2 - mgr_q// 3 - _unused_// 4,5,6,7,8,9,10,11 - global queues// we use 'xadd' on Intel, so the initial value == next assigned
其中1用于主队列，2用于管理队列，3暂时没有被使用，4~11是用于全局队列的。
4.4 全局队列
上面说了很多全局队列，现在我们来看一下全局队列是如何定义的。
dispatch_queue_tdispatch_get_global_queue(long priority, unsigned long flags)
{ if (flags & ~DISPATCH_QUEUE_OVERCOMMIT) { return NULL;
} return _dispatch_get_root_queue(priority,
flags & DISPATCH_QUEUE_OVERCOMMIT);
}static inline dispatch_queue_t_dispatch_get_root_queue(long priority, bool overcommit)
{ if (overcommit) switch (priority) { case DISPATCH_QUEUE_PRIORITY_LOW: return &_dispatch_root_queues[
DISPATCH_ROOT_QUEUE_IDX_LOW_OVERCOMMIT_PRIORITY]; case DISPATCH_QUEUE_PRIORITY_DEFAULT: return &_dispatch_root_queues[
DISPATCH_ROOT_QUEUE_IDX_DEFAULT_OVERCOMMIT_PRIORITY]; case DISPATCH_QUEUE_PRIORITY_HIGH: return &_dispatch_root_queues[
DISPATCH_ROOT_QUEUE_IDX_HIGH_OVERCOMMIT_PRIORITY]; case DISPATCH_QUEUE_PRIORITY_BACKGROUND: return &_dispatch_root_queues[
DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_OVERCOMMIT_PRIORITY];
} switch (priority) { case DISPATCH_QUEUE_PRIORITY_LOW: return &_dispatch_root_queues[DISPATCH_ROOT_QUEUE_IDX_LOW_PRIORITY]; case DISPATCH_QUEUE_PRIORITY_DEFAULT: return &_dispatch_root_queues[DISPATCH_ROOT_QUEUE_IDX_DEFAULT_PRIORITY]; case DISPATCH_QUEUE_PRIORITY_HIGH: return &_dispatch_root_queues[DISPATCH_ROOT_QUEUE_IDX_HIGH_PRIORITY]; case DISPATCH_QUEUE_PRIORITY_BACKGROUND: return &_dispatch_root_queues[
DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_PRIORITY]; default: return NULL;
}
}
DISPATCH_CACHELINE_ALIGNstruct dispatch_queue_s _dispatch_root_queues[] = {
[DISPATCH_ROOT_QUEUE_IDX_LOW_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_LOW_PRIORITY],
.dq_label = "com.apple.root.low-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 4,
},
[DISPATCH_ROOT_QUEUE_IDX_LOW_OVERCOMMIT_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_LOW_OVERCOMMIT_PRIORITY],
.dq_label = "com.apple.root.low-overcommit-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 5,
},
[DISPATCH_ROOT_QUEUE_IDX_DEFAULT_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_DEFAULT_PRIORITY],
.dq_label = "com.apple.root.default-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 6,
},
[DISPATCH_ROOT_QUEUE_IDX_DEFAULT_OVERCOMMIT_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_DEFAULT_OVERCOMMIT_PRIORITY],
.dq_label = "com.apple.root.default-overcommit-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 7,
},
[DISPATCH_ROOT_QUEUE_IDX_HIGH_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_HIGH_PRIORITY],
.dq_label = "com.apple.root.high-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 8,
},
[DISPATCH_ROOT_QUEUE_IDX_HIGH_OVERCOMMIT_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_HIGH_OVERCOMMIT_PRIORITY],
.dq_label = "com.apple.root.high-overcommit-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 9,
},
[DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_PRIORITY],
.dq_label = "com.apple.root.background-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 10,
},
[DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_OVERCOMMIT_PRIORITY] = {
.do_vtable = &_dispatch_queue_root_vtable,
.do_ref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_xref_cnt = DISPATCH_OBJECT_GLOBAL_REFCNT,
.do_suspend_cnt = DISPATCH_OBJECT_SUSPEND_LOCK,
.do_ctxt = &_dispatch_root_queue_contexts[
DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_OVERCOMMIT_PRIORITY],
.dq_label = "com.apple.root.background-overcommit-priority",
.dq_running = 2,
.dq_width = UINT32_MAX,
.dq_serialnum = 11,
},
};1.do_vtable
全局队列的do_vtable：
static const struct dispatch_queue_vtable_s _dispatch_queue_root_vtable = {
.do_type = DISPATCH_QUEUE_GLOBAL_TYPE,
.do_kind = "global-queue",
.do_debug = dispatch_queue_debug,
.do_probe = _dispatch_queue_wakeup_global,
};2.do_ctxt
全局队列中有一个上下文的属性，用来存储线程池相关数据，比如用于线程挂起和唤醒的信号量、线程池尺寸等。
它的定义如下：
static struct dispatch_root_queue_context_s _dispatch_root_queue_contexts[] = {
[DISPATCH_ROOT_QUEUE_IDX_LOW_PRIORITY] = {#if DISPATCH_ENABLE_THREAD_POOL
.dgq_thread_mediator = &_dispatch_thread_mediator[
DISPATCH_ROOT_QUEUE_IDX_LOW_PRIORITY],
.dgq_thread_pool_size = MAX_THREAD_COUNT,#endif
},
[DISPATCH_ROOT_QUEUE_IDX_LOW_OVERCOMMIT_PRIORITY] = {#if DISPATCH_ENABLE_THREAD_POOL
.dgq_thread_mediator = &_dispatch_thread_mediator[
DISPATCH_ROOT_QUEUE_IDX_LOW_OVERCOMMIT_PRIORITY],
.dgq_thread_pool_size = MAX_THREAD_COUNT,#endif
},
[DISPATCH_ROOT_QUEUE_IDX_DEFAULT_PRIORITY] = {#if DISPATCH_ENABLE_THREAD_POOL
.dgq_thread_mediator = &_dispatch_thread_mediator[
DISPATCH_ROOT_QUEUE_IDX_DEFAULT_PRIORITY],
.dgq_thread_pool_size = MAX_THREAD_COUNT,#endif
},
[DISPATCH_ROOT_QUEUE_IDX_DEFAULT_OVERCOMMIT_PRIORITY] = {#if DISPATCH_ENABLE_THREAD_POOL
.dgq_thread_mediator = &_dispatch_thread_mediator[
DISPATCH_ROOT_QUEUE_IDX_DEFAULT_OVERCOMMIT_PRIORITY],
.dgq_thread_pool_size = MAX_THREAD_COUNT,#endif
},
[DISPATCH_ROOT_QUEUE_IDX_HIGH_PRIORITY] = {#if DISPATCH_ENABLE_THREAD_POOL
.dgq_thread_mediator = &_dispatch_thread_mediator[
DISPATCH_ROOT_QUEUE_IDX_HIGH_PRIORITY],
.dgq_thread_pool_size = MAX_THREAD_COUNT,#endif
},
[DISPATCH_ROOT_QUEUE_IDX_HIGH_OVERCOMMIT_PRIORITY] = {#if DISPATCH_ENABLE_THREAD_POOL
.dgq_thread_mediator = &_dispatch_thread_mediator[
DISPATCH_ROOT_QUEUE_IDX_HIGH_OVERCOMMIT_PRIORITY],
.dgq_thread_pool_size = MAX_THREAD_COUNT,#endif
},
[DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_PRIORITY] = {#if DISPATCH_ENABLE_THREAD_POOL
.dgq_thread_mediator = &_dispatch_thread_mediator[
DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_PRIORITY],
.dgq_thread_pool_size = MAX_THREAD_COUNT,#endif
},
[DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_OVERCOMMIT_PRIORITY] = {#if DISPATCH_ENABLE_THREAD_POOL
.dgq_thread_mediator = &_dispatch_thread_mediator[
DISPATCH_ROOT_QUEUE_IDX_BACKGROUND_OVERCOMMIT_PRIORITY],
.dgq_thread_pool_size = MAX_THREAD_COUNT,#endif
},
};5. 队列的同步
5.1 dispatch_sync
dispatch_sync的源码如下：
voiddispatch_sync(dispatch_queue_t dq, void (^work)(void))
{#if DISPATCH_COCOA_COMPAT
if (slowpath(dq == &_dispatch_main_q)) { return _dispatch_sync_slow(dq, work);
}#endif
struct Block_basic *bb = (void *)work;
dispatch_sync_f(dq, work, (dispatch_function_t)bb->Block_invoke);
}如果这个队列是主队列，则调用_dispatch_sync_slow，否则调用dispatch_sync_f。点开_dispatch_sync_slow返现，最终还是调用了dispatch_sync_f方法。通过_dispatch_Block_copy或者Block_basic完成由block到function的转换。所以block的执行底层还是使用function。
5.2 dispatch_sync_f
dispatch_sync_f的源码如下：
voiddispatch_sync_f(dispatch_queue_t dq, void *ctxt, dispatch_function_t func){ //串行队列
if (fastpath(dq->dq_width == 1)) { return dispatch_barrier_sync_f(dq, ctxt, func);
} //全局队列
if (slowpath(!dq->do_targetq)) { // the global root queues do not need strict ordering
(void)dispatch_atomic_add2o(dq, dq_running, 2); return _dispatch_sync_f_invoke(dq, ctxt, func);
} //并发队列
_dispatch_sync_f2(dq, ctxt, func);
}这里分成了三种情况：
1.如果是串行队列，执行dispatch_barrier_sync_f。
2.如果是全局队列，执行_dispatch_sync_f_invoke。
3.如果是并行队列，执行_dispatch_sync_f2
5.2.1 dispatch_barrier_sync_f
如果是串行队列压入同步任务，那么当前任务就必须等待前面的任务执行完成后才能执行。源代码就会调用dispatch_barrier_sync_f函数完成上面的效果。
voiddispatch_barrier_sync_f(dispatch_queue_t dq, void *ctxt, dispatch_function_t func){ // 1) ensure that this thread hasn't enqueued anything ahead of this call
// 2) the queue is not suspended
//第一步：如果串行队列中存在其他任务或者队列被挂起，则直接进入_dispatch_sync_f_slow函数，等待这个队列中的其他任务完成(信号量的方式)，然后执行这个任务。
if (slowpath(dq->dq_items_tail) || slowpath(DISPATCH_OBJECT_SUSPENDED(dq))){ return _dispatch_barrier_sync_f_slow(dq, ctxt, func);
}
//第二步：检测队列的dq_running状态，如果有运行，进入_dispatch_barrier_sync_f_slow，等待激活。
if (slowpath(!dispatch_atomic_cmpxchg2o(dq, dq_running, 0, 1))) { // global queues and main queue bound to main thread always falls into
// the slow case
return _dispatch_barrier_sync_f_slow(dq, ctxt, func);
} //第三步：有多重队列，寻找真正的目标队列，其实还是回到了dispatch_sync_f方法
if (slowpath(dq->do_targetq->do_targetq)) { return _dispatch_barrier_sync_f_recurse(dq, ctxt, func);
} //第四步：执行队列里的任务，执行后检测队列有无其他任务，如果有，释放前面的信号量（释放信号_dispatch_barrier_sync_f2函数中）。
_dispatch_barrier_sync_f_invoke(dq, ctxt, func);
}看了上面的代码注释后，我们来想一下同步串行队列死锁问题。死锁是怎么产生的？先看下示例代码：
#import "DeadLock.h"@implementation DeadLock- (instancetype)init { if (self = [super init]) {// [self _mianQueueDeadLock];
[self _serialQueueDeadLock];
}
return self;
}#pragma mark - Private- (void)_mianQueueDeadLock { dispatch_sync(dispatch_get_main_queue(), ^(void){ NSLog(@"这里死锁了");
});
}
- (void)_serialQueueDeadLock { dispatch_queue_t queue1 = dispatch_queue_create("1serialQueue", DISPATCH_QUEUE_SERIAL); dispatch_queue_t queue2 = dispatch_queue_create("2serialQueue", DISPATCH_QUEUE_SERIAL);
dispatch_sync(queue1, ^{ NSLog(@"11111");
dispatch_sync(queue1, ^{//如果使用queue2就不会发生死锁，使用queue1就会死锁
NSLog(@"22222");
});
});
}@end以_serialQueueDeadLock为例：当第一次执行串行队列任务的时候，跳到第四步，直接开始执行任务，在运行第二个dispatch_sync时候，在任务里面通过执行第一步（队列在运行）向这个同步队列中压入信号量，然后等待信号量，进入死锁。如果主队列则会跳转到第二步进入死锁。
5.2.2 _dispatch_sync_f_invoke
static void_dispatch_sync_f_invoke(dispatch_queue_t dq, void *ctxt, dispatch_function_t func)
{
_dispatch_function_invoke(dq, ctxt, func); if (slowpath(dispatch_atomic_sub2o(dq, dq_running, 2) == 0)) {
_dispatch_wakeup(dq);
}
}如果当前队列是全局队列的话，就会调用_dispatch_sync_f_invoke。这个函数的作用：执行传入的任务，然后根据dq_running检测任务队列有没有激活，没有激活就执行激活函数。关于激活函数_dispatch_wakeup(dq)放在队列的异步中讲解。
5.2.3 _dispatch_sync_f2
_dispatch_sync_f2(dispatch_queue_t dq, void *ctxt, dispatch_function_t func)
{ // 1) ensure that this thread hasn't enqueued anything ahead of this call
// 2) the queue is not suspended
//第一步：并发队列中有其他任务或者队列被挂起，压入信号量，等待其他线程释放这个信号量
if (slowpath(dq->dq_items_tail) || slowpath(DISPATCH_OBJECT_SUSPENDED(dq))){ return _dispatch_sync_f_slow(dq, ctxt, func);
} //第二步：并行队列没激活，激活队列后执行任务，最终还是调用了_dispatch_sync_f_slow函数，只是多了一个激活函数
if (slowpath(dispatch_atomic_add2o(dq, dq_running, 2) & 1)) { return _dispatch_sync_f_slow2(dq, ctxt, func);
} //第三步：队列有多重队列，寻找真正的目标队列
if (slowpath(dq->do_targetq->do_targetq)) { return _dispatch_sync_f_recurse(dq, ctxt, func);
} //第四步：并行队列没有其他任务，调用并激活这个队列
_dispatch_sync_f_invoke(dq, ctxt, func);
}通过上面的注释，并行队列同步执行是顺序执行的。这种顺序执行和操作队列为并发队列没有关系。而是因为这些操作均为同步操作，所以每一个操作放入队列后都会被等待执行完成才会放入下一操作，造成了这种顺序执行的现象。
现在我们整理一下队列同步执行的流程，如下图：
queue_synchronize.png
6. 队列的异步
说完了同步我们现在看一下异步。我们使用dispatch_async进行队列的异步执行。
6.1 dispatch_async
dispatch_async的源码如下：
voiddispatch_async(dispatch_queue_t dq, void (^work)(void))
{
dispatch_async_f(dq, _dispatch_Block_copy(work),
_dispatch_call_block_and_release);
}dispatch_async主要将block从栈copy到堆上，或者增加引用计数，保证block在执行之前不会被销毁，另外_dispatch_call_block_and_release用于销毁block。然后调用dispatch_async_f。
6.2 dispatch_async_f
voiddispatch_async_f(dispatch_queue_t dq, void *ctxt, dispatch_function_t func){ dispatch_continuation_t dc; // No fastpath/slowpath hint because we simply don't know
//串行队列，执行dispatch_barrier_async_f，其实最后还是执行任务入队的操作
if (dq->dq_width == 1) { return dispatch_barrier_async_f(dq, ctxt, func);
} //从线程私有数据中获取一个dispatch_continuation_t的结构体
dc = fastpath(_dispatch_continuation_alloc_cacheonly()); if (!dc) { return _dispatch_async_f_slow(dq, ctxt, func);
}
dc->do_vtable = (void *)DISPATCH_OBJ_ASYNC_BIT;
dc->dc_func = func;
dc->dc_ctxt = ctxt; // No fastpath/slowpath hint because we simply don't know
//有目标队列，调用_dispatch_async_f2函数进行转发。
if (dq->do_targetq) { return _dispatch_async_f2(dq, dc);
} //全局队列直接进行入队操作
_dispatch_queue_push(dq, dc);
}从上面的源代码中我们可以看出dispatch_async_f大致分为三种情况：
如果是串行队列，调用
dispatch_barrier_async_f。其他队列且有目标队列，调用
_dispatch_async_f2。如果是全局队列的话，直接进行入队操作。
虽然上面分三种情况，但是归根到底，它们最后执行都是_dispatch_queue_push来进行入队的操作。
这里有一点需要注意下：就是dispatch_continuation_t中do_vtable的赋值情况。
//串行队列，barrierdc->do_vtable = (void *)(DISPATCH_OBJ_ASYNC_BIT | DISPATCH_OBJ_BARRIER_BIT);//not barrierdc->do_vtable = (void *)DISPATCH_OBJ_ASYNC_BIT;
在libdispatch全部标识符有四种：
#define DISPATCH_OBJ_ASYNC_BIT 0x1 //异步#define DISPATCH_OBJ_BARRIER_BIT 0x2 //阻塞#define DISPATCH_OBJ_GROUP_BIT 0x4 //组#define DISPATCH_OBJ_SYNC_SLOW_BIT 0x8 //同步慢
从上面我们可以知道串行队列在异步执行的时候，通过DISPATCH_OBJ_BARRIER_BIT这个标识符实现阻塞等待的。
接着我们分析下dispatch_barrier_async_f和_dispatch_async_f2这两个函数。
6.2.1 dispatch_barrier_async_f
dispatch_barrier_async_f的源码如下：
voiddispatch_barrier_async_f(dispatch_queue_t dq, void *ctxt, dispatch_function_t func){ dispatch_continuation_t dc; //从线程私有数据中获取一个dispatch_continuation_t的结构体，dispatch_continuation_t中封装了异步执行任务。
dc = fastpath(_dispatch_continuation_alloc_cacheonly()); if (!dc) { //return _dispatch_barrier_async_f_slow(dq, ctxt, func);
//以下是_dispatch_barrier_async_f_slow的具体实现
//如果没有则从堆上获取一个dispatch_continuation_t的结构体
dispatch_continuation_t dc = _dispatch_continuation_alloc_from_heap();
//通过do_vtable区分类型
dc->do_vtable = (void *)(DISPATCH_OBJ_ASYNC_BIT | DISPATCH_OBJ_BARRIER_BIT); //将_dispatch_call_block_and_release作为func方法
dc->dc_func = func; //将传入的block作为上下文
dc->dc_ctxt = ctxt; //入队操作
_dispatch_queue_push(dq, dc);
}
dc->do_vtable = (void *)(DISPATCH_OBJ_ASYNC_BIT | DISPATCH_OBJ_BARRIER_BIT);
dc->dc_func = func;
dc->dc_ctxt = ctxt;
_dispatch_queue_push(dq, dc);
}6.3 _dispatch_queue_push
_dispatch_queue_push是一个宏定义，它最后会变成执行_dispatch_queue_push_list函数。
#define _dispatch_queue_push(x, y) _dispatch_queue_push_list((x), (y), (y))#define _dispatch_queue_push_list _dispatch_trace_queue_push_liststatic inline void_dispatch_trace_queue_push_list(dispatch_queue_t dq, dispatch_object_t _head, dispatch_object_t _tail)
{ if (slowpath(DISPATCH_QUEUE_PUSH_ENABLED())) { struct dispatch_object_s *dou = _head._do;
do { //主要是对dispatch_continuation_s结构体的处理，确保后面的使用。
_dispatch_trace_continuation(dq, dou, DISPATCH_QUEUE_PUSH);
} while (dou != _tail._do && (dou = dou->do_next));
}
_dispatch_queue_push_list(dq, _head, _tail);
}static inline void_dispatch_queue_push_list(dispatch_queue_t dq, dispatch_object_t _head, dispatch_object_t _tail)
{ struct dispatch_object_s *prev, *head = _head._do, *tail = _tail._do;
tail->do_next = NULL;
dispatch_atomic_store_barrier(); //dispatch_atomic_xchg2o实质是调用((typeof(*(p)))__sync_swap((p), (n)))，它的定义是将p设为n并返回p操作之前的值。
//dispatch_atomic_xchg2o(dq, dq_items_tail, tail)相当于dq->dq_items_tail = tail，重新设置了队列的尾指针
prev = fastpath(dispatch_atomic_xchg2o(dq, dq_items_tail, tail)); if (prev) { // if we crash here with a value less than 0x1000, then we are at a
// known bug in client code for example, see _dispatch_queue_dispose
// or _dispatch_atfork_child
//prev是原先的队尾，如果队列中有其他的元素，就将压入的对象加在队列的尾部。
prev->do_next = head;
} else { //如果队列为空
_dispatch_queue_push_list_slow(dq, head);
}
}_dispatch_queue_push_list_slow
如果队列为空，调用_dispatch_queue_push_list_slow方法。
_dispatch_queue_push_list_slow(dispatch_queue_t dq, struct dispatch_object_s *obj)
{ //dq->dq_items_head设置为dc，然后唤醒这个队列。因为此时队列为空，没有任务在执行，处于休眠状态，所以需要唤醒
_dispatch_retain(dq);
dq->dq_items_head = obj;
_dispatch_wakeup(dq);
_dispatch_release(dq);
}6.4 _dispatch_wakeup
无论是同步还是异步中都调用了_dispatch_wakeup，这个函数的作用就是唤醒当前队列。
_dispatch_wakeup的源码：
dispatch_queue_t_dispatch_wakeup(dispatch_object_t dou)
{ dispatch_queue_t tq; if (slowpath(DISPATCH_OBJECT_SUSPENDED(dou._do))) { return NULL;
} //这里比较隐晦，这里其实是走全局队列的唤醒逻辑调用_dispatch_queue_wakeup_global，如果唤醒失败且对尾指针为空，返回NULL
if (!dx_probe(dou._do) && !dou._dq->dq_items_tail) { return NULL;
} // _dispatch_source_invoke() relies on this testing the whole suspend count
// word, not just the lock bit. In other words, no point taking the lock
// if the source is suspended or canceled.
if (!dispatch_atomic_cmpxchg2o(dou._do, do_suspend_cnt, 0,
DISPATCH_OBJECT_SUSPEND_LOCK)) {#if DISPATCH_COCOA_COMPAT
if (dou._dq == &_dispatch_main_q) { //传入主队列，会进入到 _dispatch_queue_wakeup_main() 函数中
_dispatch_queue_wakeup_main();
}#endif
return NULL;
}
_dispatch_retain(dou._do); //有目标队列，继续向目标队列压入这个队列
tq = dou._do->do_targetq;
_dispatch_queue_push(tq, dou._do); return tq; // libdispatch does not need this, but the Instrument DTrace
// probe does}从上面的代码可以看出_dispatch_wakeup分为三种情况：
1.主队列调用_dispatch_queue_wakeup_main()。
2.全局队列调用_dispatch_queue_wakeup_global。
3.其他队列像目标队列压入这个队列，继续做入队操作。
6.4.1 _dispatch_queue_wakeup_main
void_dispatch_queue_wakeup_main(void)
{ kern_return_t kr;
dispatch_once_f(&_dispatch_main_q_port_pred, NULL,
_dispatch_main_q_port_init); //唤醒主线程，这里已经点不进去了，关于主线的唤醒主要靠mach_port和在runloop中注册相对应的source1
kr = _dispatch_send_wakeup_main_thread(main_q_port, 0); switch (kr) { case MACH_SEND_TIMEOUT: case MACH_SEND_TIMED_OUT: case MACH_SEND_INVALID_DEST: break; default:
(void)dispatch_assume_zero(kr); break;
}
_dispatch_safe_fork = false;
}6.4.2 _dispatch_queue_wakeup_global
上面提到dx_probe(dou._do)这里走的是全局队列的唤醒。前面提到全局队列的do_vtable：
static const struct dispatch_queue_vtable_s _dispatch_queue_root_vtable = {
.do_type = DISPATCH_QUEUE_GLOBAL_TYPE,
.do_kind = "global-queue",
.do_debug = dispatch_queue_debug,
.do_probe = _dispatch_queue_wakeup_global,
};_dispatch_queue_wakeup_global的源码：
static bool_dispatch_queue_wakeup_global(dispatch_queue_t dq)
{ static dispatch_once_t pred; struct dispatch_root_queue_context_s *qc = dq->do_ctxt;
int r; if (!dq->dq_items_tail) { return false;
}
_dispatch_safe_fork = false;
dispatch_debug_queue(dq, __PRETTY_FUNCTION__);
dispatch_once_f(&pred, NULL, _dispatch_root_queues_init);#if HAVE_PTHREAD_WORKQUEUES#if DISPATCH_ENABLE_THREAD_POOL
//队列上下文的dgq_kworkqueue存在，则调用pthread_workqueue_additem_np函数，该函数使用workq_kernreturn系统调用，通知workqueue增加应当执行的项目。根据该通知，XNU内核基于系统状态判断是否要生成线程，如果是overcommit优先级的队列，workqueue则始终生成线程，之后线程执行_dispatch_worker_thread2函数。
//工作队列，是一个用于创建内核线程的接口，通过它创建的内核线程来执行内核其他模块排列到队列里的工作。不同优先级的dispatch queue对应着对应优先级的workqueue。GCD初始化的时候，使用pthread_workqueue_create_np创建pthread_workqueue
if (qc->dgq_kworkqueue)#endif
{ if (dispatch_atomic_cmpxchg2o(qc, dgq_pending, 0, 1)) { pthread_workitem_handle_t wh; unsigned int gen_cnt;
_dispatch_debug("requesting new worker thread");
r = pthread_workqueue_additem_np(qc->dgq_kworkqueue,
_dispatch_worker_thread2, dq, &wh, &gen_cnt);
(void)dispatch_assume_zero(r);
} else {
_dispatch_debug("work thread request still pending on global "
"queue: %p", dq);
} goto out;
}#endif // HAVE_PTHREAD_WORKQUEUES#if DISPATCH_ENABLE_THREAD_POOL
//通过发送一个信号量使线程保活
if (dispatch_semaphore_signal(qc->dgq_thread_mediator)) { goto out;
} pthread_t pthr; int t_count; do {
t_count = qc->dgq_thread_pool_size; if (!t_count) {
_dispatch_debug("The thread pool is full: %p", dq); goto out;
}
} while (!dispatch_atomic_cmpxchg2o(qc, dgq_thread_pool_size, t_count,
t_count - 1));//如果线程池可用则减1
//这里说明线程池不够用了，使用pthread创建一个线程，并执行_dispatch_worker_thread,_dispatch_worker_thread最终会调用到_dispatch_worker_thread2
while ((r = pthread_create(&pthr, NULL, _dispatch_worker_thread, dq))) { if (r != EAGAIN) {
(void)dispatch_assume_zero(r);
}
sleep(1);
}
//保证pthr能被自动回收掉
r = pthread_detach(pthr);
(void)dispatch_assume_zero(r);#endif // DISPATCH_ENABLE_THREAD_POOLout: return false;
}6.4.3 _dispatch_worker_thread2
_dispatch_worker_thread2的代码如下：
_dispatch_worker_thread2(void *context)
{ struct dispatch_object_s *item;
dispatch_queue_t dq = context; struct dispatch_root_queue_context_s *qc = dq->do_ctxt;
if (_dispatch_thread_getspecific(dispatch_queue_key)) {
DISPATCH_CRASH("Premature thread recycling");
} //把dq设置为刚启动的这个线程的TSD
_dispatch_thread_setspecific(dispatch_queue_key, dq);
qc->dgq_pending = 0;#if DISPATCH_COCOA_COMPAT
(void)dispatch_atomic_inc(&_dispatch_worker_threads); // ensure that high-level memory management techniques do not leak/crash
if (dispatch_begin_thread_4GC) {
dispatch_begin_thread_4GC();
} void *pool = _dispatch_begin_NSAutoReleasePool();#endif#if DISPATCH_PERF_MON
uint64_t start = _dispatch_absolute_time();#endif
//_dispatch_queue_concurrent_drain_one用来取出队列的一个内容
while ((item = fastpath(_dispatch_queue_concurrent_drain_one(dq)))) { // 用来对取出的内容进行处理(如果是任务，则执行任务)
_dispatch_continuation_pop(item);
}#if DISPATCH_PERF_MON
_dispatch_queue_merge_stats(start);#endif#if DISPATCH_COCOA_COMPAT
_dispatch_end_NSAutoReleasePool(pool);
dispatch_end_thread_4GC(); if (!dispatch_atomic_dec(&_dispatch_worker_threads) &&
dispatch_no_worker_threads_4GC) {
dispatch_no_worker_threads_4GC();
}#endif
_dispatch_thread_setspecific(dispatch_queue_key, NULL);
_dispatch_force_cache_cleanup();
}这里有两个比较重要的方法：
1._dispatch_queue_concurrent_drain_one这个方法用来取出队列中中的一个内容。
2._dispatch_continuation_pop这个方法用来处理取出的内容
_dispatch_queue_concurrent_drain_one
struct dispatch_object_s *
_dispatch_queue_concurrent_drain_one(dispatch_queue_t dq)
{
struct dispatch_object_s *head, *next, *const mediator = (void *)~0ul; // The mediator value acts both as a "lock" and a signal
head = dispatch_atomic_xchg(&dq->dq_items_head, mediator); if (slowpath(head == NULL)) { //队列是空的
dispatch_atomic_cmpxchg(&dq->dq_items_head, mediator, NULL);
_dispatch_debug("no work on global work queue"); return NULL;
}
if (slowpath(head == mediator)) { // 该线程在现线程竞争中失去了对队列的拥有权，这意味着libdispatch的效率很糟糕，
// 这种情况意味着在线程池中有太多的线程，这个时候应该创建一个pengding线程，
// 然后退出该线程，内核会在负载减弱的时候创建一个新的线程
_dispatch_queue_wakeup_global(dq); return NULL;
} // 在返回之前将head指针的do_next保存下来，如果next为NULL，这意味着item是最后一个
next = fastpath(head->do_next); if (slowpath(!next)) {
dq->dq_items_head = NULL;
if (dispatch_atomic_cmpxchg(&dq->dq_items_tail, head, NULL)) { // head 和 tail头尾指针均为空
goto out;
} // 此时一定有item，该线程不会等待太久.
while (!(next = head->do_next)) {
_dispatch_hardware_pause();
}
} // 继续调度
dq->dq_items_head = next;
_dispatch_queue_wakeup_global(dq);
out: // 返回队列的头指针
return head;
}_dispatch_continuation_pop
static inline void_dispatch_continuation_pop(dispatch_object_t dou)
{ dispatch_continuation_t dc = dou._dc; dispatch_group_t dg;
_dispatch_trace_continuation_pop(_dispatch_queue_get_current(), dou); //检测是不是队列，如果是，就进入_dispatch_queue_invoke 处理队列
if (DISPATCH_OBJ_IS_VTABLE(dou._do)) { return _dispatch_queue_invoke(dou._dq);
} // Add the item back to the cache before calling the function. This
// allows the 'hot' continuation to be used for a quick callback.
//
// The ccache version is per-thread.
// Therefore, the object has not been reused yet.
// This generates better assembly.
if ((long)dc->do_vtable & DISPATCH_OBJ_ASYNC_BIT) {
_dispatch_continuation_free(dc);
} //判断是否是group
if ((long)dc->do_vtable & DISPATCH_OBJ_GROUP_BIT) {
dg = dc->dc_group;
} else {
dg = NULL;
} //是任务封装的 dispatch_continuation_t 结构体，直接执行任务。
//到这里我们知道了队列执行的时候，block被调用的时机
_dispatch_client_callout(dc->dc_ctxt, dc->dc_func); if (dg) { //group需要进行调用dispatch_group_leave并释放信号
dispatch_group_leave(dg);
_dispatch_release(dg);
}
}从上面的函数中可以发现，压入队列的不仅是任务，还有可能是队列。如果是队列，直接执行了_dispatch_queue_invoke，否则执行dc->dc_func(dc->dc_ctxt)。
_dispatch_queue_invoke
void
_dispatch_queue_invoke(dispatch_queue_t dq)
{ if (!slowpath(DISPATCH_OBJECT_SUSPENDED(dq)) &&
fastpath(dispatch_atomic_cmpxchg2o(dq, dq_running, 0, 1))) {
dispatch_atomic_acquire_barrier();
dispatch_queue_t otq = dq->do_targetq, tq = NULL;
_dispatch_queue_drain(dq); if (dq->do_vtable->do_invoke) { // Assume that object invoke checks it is executing on correct queue
tq = dx_invoke(dq);
} else if (slowpath(otq != dq->do_targetq)) { // An item on the queue changed the target queue
tq = dq->do_targetq;
} // We do not need to check the result.
// When the suspend-count lock is dropped, then the check will happen.
dispatch_atomic_release_barrier(); //dq_running减1，因为任务要么被直接执行了，要么被压到target队列了
(void)dispatch_atomic_dec2o(dq, dq_running); if (tq) { return _dispatch_queue_push(tq, dq);
}
}
dq->do_next = DISPATCH_OBJECT_LISTLESS; if (!dispatch_atomic_sub2o(dq, do_suspend_cnt,
DISPATCH_OBJECT_SUSPEND_LOCK)) { //队列处于空闲状态，需要唤醒
if (dq->dq_running == 0) {
_dispatch_wakeup(dq); // verify that the queue is idle
}
} //释放队列
_dispatch_release(dq); // added when the queue is put on the list}现在我们整理一下队列异步执行的流程，如下图：
dispatch_async.png
7.总结
1.dispatch_sync函数一般都在当前线程执行，利用与线程绑定的信号量来实现串行。
2.dispatch_async函数并不是将block直接添加到队列上，而是先构成一个dispatch_continuation构造体，构造体包含了这个block还有一些上下文信息。队列会将这些任务添加队列的链表中，之后会唤醒队列，根据vtable中的函数指针，调用_dispatch_wakeup方法。在_dispatch_wakeup方法中，从线程池里取出工作线程(如果没有就新建)，然后在工作线程中取出对应block并执行。
3.dispatch_async分发到主队列的任务由Runloop处理，而分发到其他队列的任务由线程池处理。
4.GCD死锁是队列导致的而不是线程导致，原因是_dispatch_barrier_sync_f_slow函数中使用了线程对应的信号量并且调用wait方法，从而导致线程死锁。
点击查看更多内容
为 TA 点赞
评论
共同学习，写下你的评论
评论加载中...
作者其他优质文章
正在加载中
感谢您的支持，我会继续努力的～
扫码打赏，你说多少就多少
赞赏金额会直接到老师账户
支付方式
打开微信扫一扫，即可进行扫码打赏哦