WAF嵌入LNMP集群架构

前言：

之前想着每天都更新一篇文章，但是连续几天之后，发现有好多博客大佬，所以觉得还是不要献丑好一点，然后就学习一下关于安全防护的知识，毕竟安全意识强弱代表在互联网防护能力，类似ddos，xss,csrf等也是经常出现，比如一些基本的×××方式：SQL注入，web参数，cc。所以我就记录了下面全程的将WAF嵌入LNMP架构，应用于实战集群架构。附带lua语言写的防护模块。

实战：

服务器架构图如下：

WAF嵌入LNMP集群架构

一、web服务器集群高可用负载均衡

1.高可用使用：nginx+keepalived模式

master（web1） 192.168.0.230

slaver（web2） 192.168.0.211

VIP：192.168.0.100

2.两边安装keepalived

[root@web1 ~]# yum install -y keepalived

3.创建服务器监控脚本

[root@web1 ~]# mkdir -p /server/work

[root@web1 ~]# cd  /server/work/

[root@web1 work]# vim check_ng.sh

#!/bin/bash

#write by leo

d=`date --date today +%Y%m%d_%H:%M:%S`

n=`ps -C nginx --no-heading|wc -l`

#如果进程为0，则启动nginx，并且再次检测nginx进程数量，

#如果还为0，说明nginx无法启动，此时需要关闭keepalived

if [ $n -eq "0" ]; then

        /etc/init.d/nginx start

        n2=`ps -C nginx --no-heading|wc -l`

        if [ $n2 -eq "0"  ]; then

                echo "$d nginx down,keepalived will stop" >> /server/logs/nginx/check_ng.log

                systemctl stop keepalived

        fi

fi

[root@web1 work]# mkdir -p /server/logs/nginx

[root@web1 work]# chmod +x  check_ng.sh

4.修改master的keepalived配置文件

[root@web1 ~]# vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived

global_defs {

   notification_email {

boheng@buyercamp.com

   }

   notification_email_from root@web1

   smtp_server 127.0.0.1

   smtp_connect_timeout 30

   router_id LVS_DEVEL

}

   vrrp_script chk_nginx {

    script "/server/work/check_ng.sh"

    interval 3

    }

vrrp_instance VI_1 {

    state MASTER

    interface ens33

    virtual_router_id 51

    priority 100

    advert_int 1

    authentication {

        auth_type PASS

        auth_pass 000000

    }

    virtual_ipaddress {

        192.168.0.100

    }

    track_script {

        chk_nginx

    }

}

[root@web1 ~]# systemctl stop nginx

[root@web1 ~]# systemctl status nginx

nginx.service - LSB: starts the nginx web server

   Loaded: loaded (/etc/rc.d/init.d/nginx; bad; vendor preset: disabled)

   Active: inactive (dead)

     Docs: man:systemd-sysv-generator(8)

[root@web1 ~]# systemctl start keepalived

[root@web1 ~]# systemctl status keepalived

keepalived.service - LVS and VRRP High Availability Monitor

   Loaded: loaded (/usr/lib/systemd/system/keepalived.service; disabled; vendor preset: disabled)

   Active: active (running) since Fri 2018-07-13 15:06:13 CST; 32s ago

  Process: 14019 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)

Main PID: 14020 (keepalived)

   CGroup: /system.slice/keepalived.service

           ├─14020 /usr/sbin/keepalived -D

           ├─14021 /usr/sbin/keepalived -D

           └─14022 /usr/sbin/keepalived -D

Jul 13 15:06:15 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:15 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:15 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:15 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: VRRP_Instance(VI_1) Sendi...

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Hint: Some lines were ellipsized, use -l to show in full.

5.修改slaver的keepalived配置文件

[root@web2 ~]# vim /etc/keepalived/keepalived.conf

! Configuration File for keepalived

global_defs {

   notification_email {

boheng@buyercamp.com

   }

   notification_email_from root@web2

   smtp_server 127.0.0.1

   smtp_connect_timeout 30

   router_id LVS_DEVEL

}

   vrrp_script chk_nginx {

    script "/server/work/check_ng.sh"

    interval 3

}

vrrp_instance VI_1 {

    state BACKUP

    interface ens33

    virtual_router_id 51

    priority 90

    advert_int 1

    authentication {

        auth_type PASS

        auth_pass 000000

    }

    virtual_ipaddress {

    192.168.0.100

    }

    track_script {

        chk_nginx

    }

}

[root@web2 ~]# systemctl stop nginx

[root@web2 ~]# systemctl status nginx

nginx.service - LSB: starts the nginx web server

   Loaded: loaded (/etc/rc.d/init.d/nginx; bad; vendor preset: disabled)

   Active: inactive (dead)

     Docs: man:systemd-sysv-generator(8)

[root@web2 ~]# systemctl start keepalived

[root@web2 ~]# systemctl status keepalived

keepalived.service - LVS and VRRP High Availability Monitor

   Loaded: loaded (/usr/lib/systemd/system/keepalived.service; disabled; vendor preset: disabled)

   Active: active (running) since Fri 2018-07-13 15:07:20 CST; 43s ago

  Process: 13279 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)

Main PID: 13280 (keepalived)

   CGroup: /system.slice/keepalived.service

           ├─13280 /usr/sbin/keepalived -D

           ├─13281 /usr/sbin/keepalived -D

           └─13282 /usr/sbin/keepalived -D

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: Registering Kernel netlin...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: Registering gratuitous AR...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: Opening file '/etc/keepal...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: WARNING - default user 'k...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: SECURITY VIOLATION - scri...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: VRRP_Instance(VI_1) remov...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: Using LinkWatch kernel ne...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: VRRP_Instance(VI_1) Enter...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: VRRP sockpool: [ifindex(2...

Jul 13 15:07:20 web2 Keepalived_vrrp[13282]: VRRP_Script(chk_nginx) su...

Hint: Some lines were ellipsized, use -l to show in full.

6.在master上查看IP地址

[root@web1 ~]# ip a

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

       valid_lft forever preferred_lft forever

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

    link/ether 00:0c:29:c5:33:97 brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.230/24 brd 192.168.0.255 scope global noprefixroute dynamic ens33

       valid_lft 6103sec preferred_lft 6103sec

    inet 192.168.0.100/32 scope global ens33

       valid_lft forever preferred_lft forever

7.在slaver上查看IP地址

[root@web2 ~]# ip a

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

       valid_lft forever preferred_lft forever

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

    link/ether 00:0c:29:d7:df:dc brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.211/24 brd 192.168.0.255 scope global noprefixroute dynamic ens33

       valid_lft 6107sec preferred_lft 6107sec

    inet6 fe80::20c:29ff:fed7:dfdc/64 scope link

       valid_lft forever preferred_lft forever

8.在master上关闭keepalived服务（模拟master宕机或者脑裂情况）

[root@web1 ~]# systemctl stop keepalived

[root@web1 ~]# systemctl status keepalived

keepalived.service - LVS and VRRP High Availability Monitor

   Loaded: loaded (/usr/lib/systemd/system/keepalived.service; disabled; vendor preset: disabled)

   Active: inactive (dead)

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:06:20 web1 Keepalived_vrrp[14022]: Sending gratuitous ARP on...

Jul 13 15:11:20 web1 systemd[1]: Stopping LVS and VRRP High Availabil....

Jul 13 15:11:20 web1 Keepalived[14020]: Stopping

Jul 13 15:11:20 web1 Keepalived_vrrp[14022]: VRRP_Instance(VI_1) sent ...

Jul 13 15:11:20 web1 Keepalived_vrrp[14022]: VRRP_Instance(VI_1) remov...

Jul 13 15:11:21 web1 Keepalived_vrrp[14022]: Stopped

Jul 13 15:11:21 web1 Keepalived[14020]: Stopped Keepalived v1.3.5 (03...2

Jul 13 15:11:21 web1 systemd[1]: Stopped LVS and VRRP High Availabili....

Hint: Some lines were ellipsized, use -l to show in full.

9.在slaver上查看状态

[root@web2 ~]# ip a

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

       valid_lft forever preferred_lft forever

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

    link/ether 00:0c:29:d7:df:dc brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.211/24 brd 192.168.0.255 scope global noprefixroute dynamic ens33

       valid_lft 5895sec preferred_lft 5895sec

    inet 192.168.0.100/32 scope global ens33

       valid_lft forever preferred_lft forever

    inet6 fe80::20c:29ff:fed7:dfdc/64 scope link

       valid_lft forever preferred_lft forever

[root@web2 ~]# systemctl status  keepalived

keepalived.service - LVS and VRRP High Availability Monitor

   Loaded: loaded (/usr/lib/systemd/system/keepalived.service; disabled; vendor preset: disabled)

   Active: active (running) since Fri 2018-07-13 15:07:20 CST; 7min ago

  Process: 13279 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)

Main PID: 13280 (keepalived)

   CGroup: /system.slice/keepalived.service

           ├─13280 /usr/sbin/keepalived -D

           ├─13281 /usr/sbin/keepalived -D

           └─13282 /usr/sbin/keepalived -D

Jul 13 15:12:22 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Jul 13 15:12:22 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Jul 13 15:12:22 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Jul 13 15:12:22 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Jul 13 15:12:27 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Jul 13 15:12:27 web2 Keepalived_vrrp[13282]: VRRP_Instance(VI_1) Sendi...

Jul 13 15:12:27 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Jul 13 15:12:27 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Jul 13 15:12:27 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Jul 13 15:12:27 web2 Keepalived_vrrp[13282]: Sending gratuitous ARP on...

Hint: Some lines were ellipsized, use -l to show in full.

10.查看丢包情况

在windows上模拟持续性访问，使用ping查看丢包情况

WAF嵌入LNMP集群架构

二、建立共享存储服务器

1.安装NFS方式，master 服务端

[root@web1 web]# yum install -y rpcbind nfs-utils

2.slaver 客户端

[root@web2 web]# yum install -y nfs-utils

3.master服务端启动共享存储服务

[root@web1 web]# cat /etc/exports

/server/web    192.168.0.0/24(rw,sync,no_root_squash)

[root@web1 web]# systemctl start nfs

4.slaver客户端查看共享存储

[root@web2 web]# showmount -e 192.168.0.230

Export list for 192.168.0.230:

/server/web 192.168.0.0/24

[root@web2 web]#

[root@web2 web]# mount -t nfs 192.168.0.230:/server/web   /server/web    -o proto=tcp -o nolock

[root@web2 web]# ls

[root@web2 web]# df -h

Filesystem                 Size  Used Avail Use% Mounted on

/dev/mapper/centos-root     50G  4.2G   46G   9% /

devtmpfs                   899M     0  899M   0% /dev

tmpfs                      911M     0  911M   0% /dev/shm

tmpfs                      911M  9.6M  902M   2% /run

tmpfs                      911M     0  911M   0% /sys/fs/cgroup

/dev/sda1                 1014M  142M  873M  14% /boot

/dev/mapper/centos-home     47G   74M   47G   1% /home

tmpfs                      183M     0  183M   0% /run/user/0

192.168.0.230:/server/web   50G  4.2G   46G   9% /server/web

[root@web2 web]#

5.修改nginx配置文件（两边配置一致）

[root@web1 ~]# cd /usr/local/nginx/conf/vhost/

[root@web1 vhost]# vim zt.conf

server

    {

        listen 80;

        #listen [::]:80 default_server ipv6only=on;

        server_name zt.linuxview.com ;

        index index.html index.htm index.php;

        root  /server/web/test;

        #error_page   404   /404.html;

        error_page   404   404/404.html;

        include enable-php.conf;

        location /nginx_status

        {

            stub_status on;

            access_log   off;

        }

    location ~* ^/data/(attachment|avatar)/.*\.(php|php5)$ {

        deny all;

    }

        location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$

        {

            expires      30d;

        }

        location ~ .*\.(js|css)?$

        {

            expires      12h;

        }

        location ~ /\.

        {

            deny all;

        }

        access_log  /server/logs/nginx/zuitu/access.log ;

        error_log  /server/logs/nginx/zuitu/error.log ;

    }

6.访问网页

WAF嵌入LNMP集群架构

7.master上设置反向代理

[root@web1 vhost]# vim xs.conf

server

    {

        listen 80;

        server_name xs.linuxview.com ;

    location / {

        proxy_pass http://192.168.0.211:80;

        proxy_set_header Host xs.linuxview.com;

        proxy_redirect off;

        proxy_set_header X-Real-IP 192.168.0.211;

        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

        proxy_connect_timeout 60;

        proxy_read_timeout 600;

        proxy_send_timeout 600;

    }

        access_log  /server/logs/nginx/zuitu/access.log ;

        error_log  /server/logs/nginx/zuitu/error.log ;

    }

[root@web1 vhost]# /usr/local/nginx/sbin/nginx -s reload

8.slaver上设置nginx的配置文件

[root@web2 vhost]# vim xs.conf

server

    {

        listen 80;

        #listen [::]:80 default_server ipv6only=on;

        server_name xs.linuxview.com ;

        index index.html index.htm index.php;

        root  /server/web/test3;

        #error_page   404   /404.html;

        error_page   404   404/404.html;

        include enable-php.conf;

        location /nginx_status

        {

            stub_status on;

            access_log   off;

        }

    location ~* ^/data/(attachment|avatar)/.*\.(php|php5)$ {

        deny all;

    }

        location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$

        {

            expires      30d;

        }

        location ~ .*\.(js|css)?$

        {

            expires      12h;

        }

        location ~ /\.

        {

            deny all;

        }

        access_log  /server/logs/nginx/zuitu/access.log ;

        error_log  /server/logs/nginx/zuitu/error.log ;

    }

[root@web2 vhost]# /usr/local/nginx/sbin/nginx -s reload

9.访问网页测试

WAF嵌入LNMP集群架构

三、WAF镶嵌lnmp架构

1.安装依赖包

[root@waf ~]# yum install -y readline-devel pcre-devel openssl-devel gcc* git* libxml2*

2.下载2.0.5版本的luajit，编译安装

[root@waf ~]# mkdir -p /server/source

[root@waf ~]# cd /server/source/

[root@waf source]# wget http://luajit.org/download/LuaJIT-2.0.5.tar.gz

[root@waf source]# tar -xf LuaJIT-2.0.5.tar.gz

[root@waf source]# cd LuaJIT-2.0.5

[root@waf LuaJIT-2.0.5]# export LUAJIT_LIB=/user/local/lib

[root@waf LuaJIT-2.0.5]# export LUAJIT_INC=/usr/local/include/luajit-2.0

[root@waf LuaJIT-2.0.5]# make && make install   &&  ln -s /usr/local/lib/libluajit-5.1.so.2 /lib64/libluajit-5.1.so.2

成功安装标志：

WAF嵌入LNMP集群架构

3.下载并编译安装openresty

[root@waf source]# wget https://openresty.org/download/openresty-1.11.2.2.tar.gz

[root@waf source]# tar -xf openresty-1.11.2.2.tar.gz

[root@waf source]# cd openresty-1.11.2.2

[root@waf openresty-1.11.2.2]# ./configure --prefix=/usr/local/openresty  --user=www  --group=www  --with-luajit --with-http_v2_module  --with-http_stub_status_module  --with-http_ssl_module  --with-http_gzip_static_module  --with-ipv6 --with-http_sub_module  --with-pcre  --with-pcre-jit  --with-file-aio --with-http_dav_module

[root@waf openresty-1.11.2.2]# gmake && gmake install

4.修改最大文件打开数量

[root@waf openresty-1.11.2.2]# vim /proc/sys/fs/file-max

100000

[root@waf openresty-1.11.2.2]# ulimit -l

64

5.修改openresty内置的nginx配置文件（--prefix指定的是安装目录，所以配置文件就在安装目录里面，编译完成之后，就不用在源码包界面了）

[root@waf openresty]# mkdir /server/conf

[root@waf openresty]# pwd

/usr/local/openresty

[root@waf openresty]# cd /server/conf/

[root@waf conf]# ls

[root@waf conf]# ln -s /usr/local/openresty    /server/conf/openresty

[root@waf conf]# ls

openresty

[root@waf conf]# ln -s  /usr/local/openresty/nginx    /server/conf/nginx

[root@waf conf]# ll

total 0

lrwxrwxrwx 1 root root 26 Jul 10 09:25 nginx -> /usr/local/openresty/nginx

lrwxrwxrwx 1 root root 20 Jul 10 09:23 openresty -> /usr/local/openresty

[root@waf conf]#vim nginx.conf   （修改user为www ,在最后一行的括号上新增include vhost/*.conf;）

[root@waf conf]# useradd www -M -s /sbin/nologin

[root@waf conf]# mkdir vhost

[root@waf conf]# cd vhost/

##编写测试网页

[root@waf vhost]# vim waf.conf

server {

        listen 80 ;

        server_name waf.linuxview.com ;

        index index.html index.php index.htm ;

        root /server/web/waf ;

        error_log /server/logs/nginx/waf/error.log;

        access_log /server/logs/nginx/waf/access.log;

}

[root@waf vhost]# mkdir -p /server/web/waf && cd /server/web/waf

##创建测试网页

[root@waf waf]# cat index.html

Welcome to Linuxview!!!

##重加载nginx

[root@waf waf]# /usr/local/openresty/nginx/sbin/nginx -s reload

6.访问测试网页

WAF嵌入LNMP集群架构

7.安装waf防护模块

[root@waf waf]# cd /server/source/      #这个目录用来存源码或软件包等

[root@waf source]# git clone https://github.com/leoheng/lua.git

#这些全是lua语言写的防护模块，复制到nginx的conf配置文件目录

[root@waf waf]# cp -a ./waf  /server/conf/nginx/conf/

[root@waf waf]# cd /server/conf/nginx/conf/

[root@waf conf]# ls

fastcgi.conf            koi-win             scgi_params           waf

fastcgi.conf.default    mime.types          scgi_params.default   win-utf

fastcgi_params          mime.types.default  uwsgi_params

fastcgi_params.default  nginx.conf          uwsgi_params.default

koi-utf                 nginx.conf.default  vhost

[root@waf conf]# cd waf/

[root@waf waf]# ls

access.lua  config.lua  init.lua  lib.lua  rule-config

[root@waf waf]#cd ..

##在http字段下添加lua模块

[root@waf conf]# vim nginx.conf

        lua_shared_dict limit 50m;  ##CC,50M

        lua_package_path  /server/conf/nginx/conf/waf/?.lua ;

        init_by_lua_file  /server/conf/nginx/conf/waf/init.lua ;

        access_by_lua_file  /server/conf/nginx/conf/waf/access.lua ;

##检查配置文件并重加载服务

[root@waf conf]# /usr/local/openresty/nginx/sbin/nginx -t

nginx: the configuration file /usr/local/openresty/nginx/conf/nginx.conf syntax is ok

nginx: configuration file /usr/local/openresty/nginx/conf/nginx.conf test is successful

[root@waf conf]# /usr/local/openresty/nginx/sbin/nginx -s reload

8.配置waf防护

[root@waf waf]# cat config.lua

--WAF config file,enable = "on",disable = "off"   ##WAF功能选项

--waf status

config_waf_enable = "on"    ##是否启动waf防护

--log dir

config_log_dir = "/server/logs/waf_logs"     ##waf的日志

--rule setting

config_rule_dir = "/usr/local/openresty/nginx/conf/waf/rule-config"     ##waf的防护规则配置文件

--enable/disable white url

config_white_url_check = "on"        ##配置白名单url检查

--enable/disable white ip    

config_white_ip_check = "on"         ##配置白名单IP检查

--enable/disable block ip

config_black_ip_check = "on"          ##配置黑名单IP检查

--enable/disable url filtering

config_url_check = "on"                    ##配置url检查过滤

--enalbe/disable url args filtering

config_url_args_check = "on"            ##配置url参数检查

--enable/disable user agent filtering

config_user_agent_check = "on"        ##配置用户代理检查

--enable/disable cookie deny filtering

config_cookie_check = "on"       ##配置cookie过滤检查

--enable/disable cc filtering

config_cc_check = "on"                ##配置CC×××检查过滤

--cc rate the xxx of xxx seconds

config_cc_rate = "10/60"            ##CC×××速率访问网页每60秒访问10次

--enable/disable post filtering

config_post_check = "on"          ##配置post检查过滤

--config waf output redirect/html

config_waf_output = "html"           ##配置匹配成功重定向或者输出警告页面

--if config_waf_output ,setting url

config_waf_redirect_url = "https://www.baidu.com"            ##重定向到百度首页

##输出HTML格式的警告信息[[ html警告内容 ]]

config_output_html=[[                                

<html>

<head>

<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<meta http-equiv="Content-Language" content="zh-cn" />

<title>WAF-TEST</title>

</head>

<body>

<h1 align="center> WAF功能防护中，请勿进行非正常操作

</body>

</html>

]]

9.访问匹配模块

规则：检测白名单-》黑名单-》UA×××检测-》CC×××检测-》cookie检测-》URL检测-》URL×××检测-》URL参数检测-》post检测

[root@waf waf]# cat access.lua

require 'init'     ##先请求init.lua文件进行匹配，然后进行检查功能匹配

##配置检查顺序

function waf_main()

    if white_ip_check() then

    elseif black_ip_check() then

    elseif user_agent_attack_check() then

    elseif cc_attack_check() then

    elseif cookie_attack_check() then

    elseif white_url_check() then

    elseif url_attack_check() then

    elseif url_args_attack_check() then

    --elseif post_attack_check() then

    else

        return

    end

end

waf_main()

[root@waf waf]#

10.防护规则大概流程图：

WAF嵌入LNMP集群架构

11.url参数测试

WAF嵌入LNMP集群架构

12.模拟CC×××测试

[root@waf waf]# ab -c 100 -t 100 http://waf.linuxview.com/

WAF嵌入LNMP集群架构

WAF嵌入LNMP集群架构

13.查看日志记录：×××方式，客户端地址，被×××的服务器时间等等

WAF嵌入LNMP集群架构

14.SQL测试

WAF嵌入LNMP集群架构

15.安装httpguard再升级CC防护

下载压缩包，复制lua配置到waf下

[root@waf waf]# cd /server/source/

[root@waf source]# wget --no-check-certificate https://github.com/centos-bz/HttpGuard/archive/master.zip

[root@waf source]# unzip master.zip

[root@waf source]# cd HttpGuard-master/

[root@waf HttpGuard-master]# cp guard.lua /server/conf/nginx/conf/waf/

[root@waf HttpGuard-master]# cp runtime.lua /server/conf/nginx/conf/waf/

四、MySQL5.7集群（双主多从模式）

当只有两台数据库的时候，使用双主模式（互为主从）

1.修改master的mysql配置文件

[root@web1 ~]# vim /etc/my.cnf    #在mysqld下新增一下配置

[mysqld]

log-bin=mysql-bin

binlog_format=mixed

server-id   = 1

sync_binlog = 1

binlog_checksum = none

binlog_format = mixed

auto-increment-increment = 2

auto-increment-offset = 1

slave-skip-errors = all

[root@web1 ~]# systemctl restart mysql

[root@web1 ~]# systemctl status mysql

mysql.service - LSB: start and stop MySQL

   Loaded: loaded (/etc/rc.d/init.d/mysql; bad; vendor preset: disabled)

   Active: active (exited) since Fri 2018-07-13 17:18:39 CST; 6s ago

     Docs: man:systemd-sysv-generator(8)

  Process: 37255 ExecStart=/etc/rc.d/init.d/mysql start (code=exited, status=0/SUCCESS)

Jul 13 17:18:39 web1 systemd[1]: Starting LSB: start and stop MySQL...

Jul 13 17:18:39 web1 mysql[37255]: Starting MySQL SUCCESS!

Jul 13 17:18:39 web1 systemd[1]: Started LSB: start and stop MySQL.

Jul 13 17:18:40 web1 mysql[37255]: 2018-07-13T09:18:40.050893Z mysqld_safe A mys...ts

Hint: Some lines were ellipsized, use -l to show in full.

2.进入数据库，赋权给web2用户，让它连接主数据库同步数据

[root@web1 ~]# mysql -uroot -p000000

mysql: [Warning] Using a password on the command line interface can be insecure.

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 3

Server version: 5.7.18-log Source distribution

Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> grant replication slave,replication client on *.* to web2@'192.168.0.%' identified by "000000";

Query OK, 0 rows affected, 1 warning (0.13 sec)

mysql> flush privileges;

Query OK, 0 rows affected (0.03 sec)

###查看log bin日志和post值位置

mysql> show master status;

+------------------+----------+--------------+------------------+-------------------+

| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |

+------------------+----------+--------------+------------------+-------------------+

| mysql-bin.000006 |      620 |              |                  |                   |

+------------------+----------+--------------+------------------+-------------------+

1 row in set (0.01 sec)

mysql>

3.在slaver上修改MySQL配置文件

[root@web2 ~]# vim /etc/my.cnf

[mysqld]

server-id = 2

log-bin = mysql-bin

sync_binlog = 1

binlog_checksum = none

binlog_format = mixed

auto-increment-increment = 2

auto-increment-offset = 2

slave-skip-errors = all

[root@web2 ~]# systemctl restart mysql

[root@web2 ~]# systemctl status mysql

mysql.service - LSB: start and stop MySQL

   Loaded: loaded (/etc/rc.d/init.d/mysql; bad; vendor preset: disabled)

   Active: active (running) since Fri 2018-07-13 17:29:56 CST; 20s ago

     Docs: man:systemd-sysv-generator(8)

  Process: 31883 ExecStart=/etc/rc.d/init.d/mysql start (code=exited, status=0/SUCCESS)

   CGroup: /system.slice/mysql.service

           ├─31891 /bin/sh /usr/local/mysql/bin/mysqld_safe --datadir=/usr/local/m...

           └─32461 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadi...

Jul 13 17:29:38 web2 systemd[1]: Starting LSB: start and stop MySQL...

Jul 13 17:29:56 web2 mysql[31883]: Starting MySQL................. SUCCESS!

Jul 13 17:29:56 web2 systemd[1]: Started LSB: start and stop MySQL.

4.创建数据库用户用于数据库同步数据

[root@web2 ~]# mysql -uroot -p000000

mysql: [Warning] Using a password on the command line interface can be insecure.

Welcome to the MySQL monitor.  Commands end with ; or \g.

Your MySQL connection id is 3

Server version: 5.7.18-log Source distribution

Copyright (c) 2000, 2017, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> grant replication slave,replication client on *.* to web2@'192.168.0.%' identified by "000000";

ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'identiified by "000000"' at line 1

mysql> grant replication slave,replication client on *.* to web2@'192.168.0..%' identified by "000000";

Query OK, 0 rows affected, 1 warning (0.18 sec)

mysql> flush privileges;

Query OK, 0 rows affected (0.00 sec)

mysql> show master status;

+------------------+----------+--------------+------------------+-------------------+

| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |

+------------------+----------+--------------+------------------+-------------------+

| mysql-bin.000007 |      610 |              |                  |                   |

+------------------+----------+--------------+------------------+-------------------+

1 row in set (0.01 sec)

mysql>

5.在master上同步数据库到slaver上

mysql> stop slave;

Query OK, 0 rows affected, 1 warning (0.02 sec)

mysql> change  master to master_host='192.168.0.211',master_user='web2',master_password='000000',master_log_file='mysql-bin.000006',master_log_pos=620;

Query OK, 0 rows affected, 2 warnings (0.03 sec)

mysql> start slave;

Query OK, 0 rows affected (0.00 sec)

mysql> show slave status \G;

*************************** 1. row ***************************

               Slave_IO_State: Waiting for master to send event

                  Master_Host: 192.168.0.211

                  Master_User: web2

                  Master_Port: 3306

                Connect_Retry: 60

              Master_Log_File: mysql-bin.000008

          Read_Master_Log_Pos: 1110

               Relay_Log_File: web1-relay-bin.000002

                Relay_Log_Pos: 312

        Relay_Master_Log_File: mysql-bin.000008

             Slave_IO_Running: Yes

            Slave_SQL_Running: Yes

              Replicate_Do_DB:

          Replicate_Ignore_DB:

           Replicate_Do_Table:

       Replicate_Ignore_Table:

      Replicate_Wild_Do_Table:

  Replicate_Wild_Ignore_Table:

                   Last_Errno: 0

                   Last_Error:

                 Skip_Counter: 0

          Exec_Master_Log_Pos: 1110

              Relay_Log_Space: 510

              Until_Condition: None

               Until_Log_File:

                Until_Log_Pos: 0

           Master_SSL_Allowed: No

           Master_SSL_CA_File:

           Master_SSL_CA_Path:

              Master_SSL_Cert:

            Master_SSL_Cipher:

               Master_SSL_Key:

        Seconds_Behind_Master: 0

Master_SSL_Verify_Server_Cert: No

                Last_IO_Errno: 0

                Last_IO_Error:

               Last_SQL_Errno: 0

               Last_SQL_Error:

  Replicate_Ignore_Server_Ids:

             Master_Server_Id: 2

                  Master_UUID: ed87ba4b-8653-11e8-94fe-000c29d7dfdc

             Master_Info_File: /usr/local/mysql/var/master.info

                    SQL_Delay: 0

          SQL_Remaining_Delay: NULL

      Slave_SQL_Running_State: Slave has read all relay log; waiting for more updates

           Master_Retry_Count: 86400

                  Master_Bind:

      Last_IO_Error_Timestamp:

     Last_SQL_Error_Timestamp:

               Master_SSL_Crl:

           Master_SSL_Crlpath:

           Retrieved_Gtid_Set:

            Executed_Gtid_Set:

                Auto_Position: 0

         Replicate_Rewrite_DB:

                 Channel_Name:

           Master_TLS_Version:

1 row in set (0.00 sec)

6.在slaver上同步master的数据库

mysql> stop slave;

Query OK, 0 rows affected, 1 warning (0.02 sec)

mysql> change  master to master_host='192.168.0.230',master_user='web2',master_password='000000',master_log_file='mysql-bin.000006',master_log_pos=620;

Query OK, 0 rows affected, 2 warnings (0.03 sec)

mysql> start slave;

Query OK, 0 rows affected (0.00 sec)

mysql> show slave status \G;

*************************** 1. row ***************************

               Slave_IO_State: Connecting to master

                  Master_Host: 192.168.0.230

                  Master_User: web1

                  Master_Port: 3306

                Connect_Retry: 60

              Master_Log_File: mysql-bin.000010

          Read_Master_Log_Pos: 1110

               Relay_Log_File: web2-relay-bin.000001

                Relay_Log_Pos: 4

        Relay_Master_Log_File: mysql-bin.000010

             Slave_IO_Running: Yes

            Slave_SQL_Running: Yes

7.在master的数据库上创建数据库和表

mysql> create database leotest;

Query OK, 1 row affected (0.00 sec)

mysql> use leotest;

Database changed

mysql> create table test(id int(4),name varchar(10));

Query OK, 0 rows affected (0.04 sec)

mysql> show tables ;

+-------------------+

| Tables_in_leotest |

+-------------------+

| test              |

+-------------------+

1 row in set (0.00 sec)

mysql>

8.在slaver上查看同步的数据

mysql> show databases;

+--------------------+

| Database           |

+--------------------+

| information_schema |

| leotest            |

| mysql              |

| performance_schema |

| sys                |

+--------------------+

5 rows in set (0.00 sec)

mysql>

至此，MySQL集群已完成，而waf嵌入LNMP集群架构也完成了。

©著作权归作者所有：来自51CTO博客作者leo恒动力的原创作品，如需转载，请注明出处，否则将追究法律责任

wafweb负载均衡日常